Free shipping from €100
pH 10 buffer solution
pH 10 buffer solution (calibration solution pH 10.01 at 25 °C) for calibrating pH probe and pH meter. Available in 250 ml, 60 ml and 20 ml.
Showing all 7 results
-
Buffer solution pH 10 5×60 ml
€29,00 incl. VAT -
pH 10 buffer solution 250 ml
€15,00 incl. VAT -
Buffer solution pH 10 sachets 25×20 ml
€35,00 incl. VAT -
Buffer solution (7/10/475 mV/KCl/H2O)
€30,00 incl. VAT -
Buffer solution pH 7, pH 10 and 475 mV sachets 3×10
€39,00 incl. VAT -
Buffer solution pH 7 and pH 10 sachets 2×10
€29,00 incl. VAT -
Buffer solution pH 4, pH 7 and pH 10 sachets 3×10
€39,00 incl. VAT
Buffer solution pH 10 for calibrating pH probe and pH meter
Buffer solution pH 10 (pH 10.01 at 25 °C) is the alkaline point for calibrating your pH probe or pH meter. NIST traceable, certificate of analysis per lot and SDS available. Available in 250 ml, 60 ml and 20 ml. This buffer solution is also called pH buffer.
How to calibrate with pH 10
- First rinse the pH probe with clean water.
- If it is dirty or contaminated, first clean it with cleaning solution for probes.
- Most calibrations start at pH 7.
- Always check the manual of your measuring system for a correct calibration of your pH probe or pH meter.
Packs:
- pH 10 buffer solution 250 ml
- Buffer solution pH 10 60 ml (sold per set of 5×60 ml)
- Buffer solution pH 10 20 ml (sold per box of 25×20 ml)
- Calibration sets pH and ORP
Storing buffer solution pH 10
Store the buffer solution in its original, tightly closed packaging, cool and dry at 15–25 °C, protected from frost and direct sunlight, and away from strong acids or oxidising agents.
Frequently asked questions about buffer solution pH 10
Is pH 10.01 the same as pH 10?
Yes, it is the same buffer solution. The exact pH value of the pH calibration solution is pH 10.01 at 25 °C.
Do I always have to calibrate pH 7 first?
Usually yes, that depends on your manual. First the neutral point, then pH 10.
Can I pour used pH 10 back into the bottle?
No, you may not. Pour a fresh dose into a clean beaker or glass, carry out the calibration and discard the remaining solution.
Do I store the pH probe in pH 10?
No, always store a pH probe in KCl storage solution 3 mol/l for probes. Demineralised water may only be used for rinsing, never for storage.
Is Meytec pH 10 NIST traceable?
Yes. Every lot has a CoA. SDS and CoAs can be found under Downloads.
Is this buffer solution suitable for all pH probes and pH meters?
Yes, this is a standard buffer solution that you can use for all kinds of applications and with all brands of pH probes and pH meters. Such as Sugar Valley, Hayward, Zodiac, AstralPool, Bayrol, Hanna, Milwaukee, Seko, Kripsol…
Order the buffer solution pH 10 that your pH probe or pH meter requires. Do you still have doubts or questions? Contact us.
