We currently do not deliver to Malta.
ORP buffer solution 240 mV
ORP buffer solution 240 mV (ORP calibration solution 240 mV at 20 °C) for calibrating ORP probe and ORP meter. Available in 60 ml.
Showing the single result
-
ORP buffer solution 240 mV 60 ml (5x60ml)
€29,00 incl. VAT
ORP buffer solution 240 mV for calibrating ORP probe and ORP meter
ORP buffer solution 240 mV (at 20 °C) is in the lower range. Available in 60 ml. This ORP buffer solution is also called ORP calibration solution.
First rinse the ORP probe. Clean if necessary.
ORP buffer solution 240 mV in 60 ml bottles
In the ORP buffer solution 240 mV 60 ml, you place the ORP probe directly into the bottle: the neck is wide enough. With one bottle you can calibrate several times, as long as the solution does not become contaminated. ORP buffer solution is corrosive: do not leave the ORP probe in it longer than necessary and rinse it thoroughly afterwards.
Frequently asked questions about ORP buffer solution 240 mV
May I pour used 240 mV back into the bottle?
No, you may not. Pour a fresh dose into a clean beaker or glass, carry out the calibration and discard the remaining solution.
Do I store the ORP probe in 240 mV?
No, always store an ORP probe in KCl storage solution 3 mol/l for electrodes. Demineralised water may only be used for rinsing, never for storage.
Does this buffer solution fit all ORP probes and ORP meters?
Yes, this ORP buffer solution is a standard reference and can be used with the majority of ORP controllers: Sugar Valley, Hayward, Zodiac, AstralPool, Bayrol, Hanna, Milwaukee, Seko, Kripsol…
Order the ORP buffer solution 240 mV that your ORP probe or ORP meter requires. Do you still have doubts or questions? Contact us.
